General information.

The building is designed from frame-panel structures, with finishing. The building has a frame-panel structural scheme. The load-bearing element of the building is a three-dimensional frame consisting of racks, base panels and roofing made of hot-rolled profiles. The frame of the walls is sheathed on the outside with profiled galvanized sheets. Base panels, wall panels and roof panels are multi-layered with insulation. As a heater, mats of pierced heat-insulating grades MP75 according to TU 5769-019-00287220-2006 are accepted. All wood elements are subjected to bio-fire retardant treatment in accordance with the requirements of SNiP 2.03.11-85. Wall panels are fastened to the frames of the base and roof panels using self-tapping screws. The racks are fastened to the roof and base panels with bolts and welded through an additional plate. The joints of the wall panels are sealed with mineral wool and covered with S-12 plywood. The joints of wall panels and roof panels are sealed with cable and mineral wool, sealed with mastic and covered with flashings. Joints of wall panels with base panels are sealed
fabric and covered with a plinth. Foundations and plinth - are developed by the general designer on the basis of geological surveys. The roof is gable, attic on metal structures. Roof - profiled flooring. Partitions - type KNAUF. Windows - plastic. Doors - wooden, according to current state standards. Interior finishes - see list of interior finishes.