Barn for 400 loose cows

The barn building for 400 loose cows No. 1 is one-story, not heated, rectangular in plan with dimensions in the axes of 114x33 m. The roof is gable with a coating of sandwich panels along metal girders. In barn No. 1, the premises for keeping animals are divided into four sections: two for 110 cattle places and two for 115 cattle places. Also in the barn there is a fodder table and cattle passes. Entrances to the building are provided through gates in swing gates along the end walls. The barn building for 400 loose cows No. 2 is one-story, not heated, rectangular in plan with dimensions in the axes of 114x33 m. The roof is gable with a coating of sandwich panels along metal girders. The foundations of cowsheds for 400 loose cows No. 1, No. 2 are columnar precast-monolithic reinforced concrete under the columns. Plinth along axes A, G, prefabricated panels according to series 1.030.1-1 supported by foundation beams. Columns - prefabricated reinforced concrete with a section of 400x400 mm according to the series 1.423.1-3/88. Walls - along axes A, B prefabricated wall panels 300 mm thick according to series 1.030.1-1, along axes 1,20 sandwich panels 60 mm thick. Mullions along axes 1, 20 - from closed steel profiles according to GOST 30245-2003, steel C255

DMB for one Parallel 2x20 installation

The building of the milking and dairy unit is one-story, heated, T-shaped in plan, with dimensions from the axes 70,28x50,08, height to the ceiling and bottom of the coating structures from 2,5 to 5,2 m. The milking and milking unit is located between the buildings of cowsheds No. 1 and No. 2 according to the general plan. The building is designed in light metal structures. The roof is gable covered with sandwich panels over metal girders. Light-aeration lamps are installed on the roof ridge of the central block.

Connecting gallery

The building is one-story, unheated, rhomboid in plan, with dimensions in the axes of 16,65 x 3,0 m. The building is designed from light metal structures with walls made of sandwich panels. The roof is shed with a coating of sandwich panels along metal girders. The connecting gallery is located between the buildings of the cowshed No. 2 and the dairy block No. 4.1, designed to drive cows from the cowsheds of the dairy herd to the dry section and cows from the maternity ward to the cowsheds of the dairy herd. The constructive scheme of the building is frame.

Barn for 230 dry cows with a maternity ward

The building is T-shaped in plan, two blocks are connected by a technological process. One-story, without a basement, not heated, rectangular in plan with dimensions in the axes of 114x33 m. The configuration of the building in the plan is dictated by the technology for keeping animals and the general concept of the master plan.

Dispensary for calves

The building is one-story, heated, t-shaped in plan, with dimensions from axes 36x18m, height to the ceiling and bottom of the roof structures from 3,65 m. The roof is gable covered with sandwich panels over metal girders. Light-aeration lamps are installed on the roof ridge of the central block. Building with internal reinforced concrete columns. Longitudinal walls made of reinforced concrete panels with fragments of expanded clay concrete masonry and arrangement of sliding polycarbonate curtains on large openings. End walls made of sandwich panels. The configuration of the building in the plan is dictated by the technology for keeping animals and the general concept of the master plan. The building of the dispensary contains 86 (up to 20 days old) calves in special individual boxes.

Building for keeping young animals for 495 heads

The building is one-story, unheated, rectangular in plan with dimensions in the axes of 102x27 m. The configuration of the building in the plan is dictated by the technology for keeping animals and the general concept of the master plan. The building is divided into thirteen sections, there is also a feed table (in the center) and utility rooms: an electrical panel room, an inventory room, and two engineering rooms. Entrances to the building are provided through gates in swing gates along the end walls.

Building for keeping young animals for 300 heads

The building is a one-story, unheated, rectangular in plan with dimensions in the axes of 102,0x27,0 and a height to the bottom of the roof structures from 3,700 to 5,600 m. The roof is gable covered with sandwich panels over metal girders. Light-aeration lamps are installed on the roof ridge of the central block. The building is divided into 8 sections, a fodder table (in the center) and utility rooms are also provided: a doctor's room, two inventory rooms, an electrical panel room, and two engineering rooms. Entrances to the building are provided through gates in swing gates along the end walls.

Building for keeping heifers for 270 heads

The building is a one-story, unheated, rectangular in plan with dimensions in the axes of 102,0x27,0 and a height to the bottom of the roof structures from 3,700 to 5,600 m. The longitudinal walls are made of reinforced concrete panels with fragments of expanded clay concrete masonry and the installation of sliding curtains made of polycarbonate on large openings. End walls made of sandwich panels. The roof is gable covered with sandwich panels over metal girders. Light-aeration lamps are installed on the roof ridge of the central block.

manure collector

The building is one-story, rectangular in plan, with dimensions in the axes of 10,50x6,00 m and a height to the bottom of the roof structures of the aboveground part of 4,2 m, with an underground pit measuring 10,5x6,0 m and a bottom elevation of -4,800. The building is heated, with stone walls and a flat roof. The architectural and breading organization of the manure collector is based on the principles that ensure the technological connection between the buildings of the dairy farm.

Sanitary checkpoint with a walk-through and covered heated disinfection barrier

The configuration of the building in the plan is dictated by the general concept of the general plan and is associated with the technology of the access system for people and vehicles to the territory of the dairy farm. The sanitary checkpoint with a checkpoint and a covered heated disinfection barrier is a one-story building consisting of three rectangular blocks interlocked with each other. The entrance to the building is through the checkpoint, the connection with the sanitary checkpoint is provided through the corridor. The entrance is the main entrance to the building and to the territory of the dairy farm.

Weight with truck scales, load capacity 60 tons

The configuration of the building in terms of plan is dictated by the general concept of the master plan and is associated with the production technology of a dairy farm. The building is L-shaped in plan: two blocks connected by a technological process. Weight is a one-story building, consisting of two rectangular blocks: bweighing box with truck scales with a carrying capacity of 60 tons, dimensions in the axes 24x6 m and a height to the bottom of the coating structure - 5,2 m; weighing unit with dimensions in the axes of 5,5x2,93 m and a room height of 2,5 m. Weight block - not heated, with walls made of profiled sheet with a polymer coating. Roof - gable of profiled sheet with a polymer coating, with an unorganized external drain. Snow guards are provided on the roof. Bweigher's locker - heated, with stone walls and a flat roof.

Shed for hay with a capacity of 750 tons

The building is one-story, unheated, rectangular in plan, with dimensions in the axes of 72x18 m and a height of 5,9 m to the bottom of the roof structure. The building consists of two blocks with axes of 35x18 m each, separated by a type 1 fire wall. The roof is gable covered with a profiled sheet with a polymer coating. Columns - reinforced concrete, walls up to el. +0,600 reinforced concrete, above - mesh fencing along metal girders. The fire wall between the blocks is made of expanded clay concrete stones, between the axes 6 and 7 - monolithic reinforced concrete. The configuration of the building in the plan is dictated by the hay storage technology and the general concept of the master plan. Entrance and exit of equipment - through swing gates. Exits to the building are provided through the gates in the gates.

Warehouse for placement of compound feed mixtures

The building is one-story, unheated, rectangular in plan with dimensions in the axes of 85x18 and a height of 6,000 m to the bottom of the roof structure. to el. +6,0 m. reinforced concrete, above - from a profiled sheet on metal beams. The configuration of the building in the plan is dictated by the technology for storing feed mixtures and the general concept of the master plan. Entrances to the building are provided through doors in the end walls. Entrance and exit of equipment - through the lifting-sectional gates in the end walls.

Manure pumping station

The building is one-story, rectangular in plan, with dimensions in the axes of 6,0x6,0 m and a height to the bottom of the roof structures of the above-ground part of 3,6 m, with an underground part with a diameter of 3,00 m and elev. bottoms -6,450. The building is heated, with stone walls and a flat roof. The architectural and planning organization of the building is based on the principles that ensure the technological connection between the buildings of the dairy farm.

Water treatment building

The building is one-story, rectangular in plan, with dimensions in the axes of 6,0x4,0 m and a height of 3,6 m to the ceiling. The building is heated, with stone walls and a flat roof. The architectural and planning organization of the building is based on the principles that ensure the technological connection between the buildings of the dairy farm.